Quality of Service Guide Network Queue QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 215
5.2 Basic Configuration
This section contains the following topics related to creating and applying network
queue QoS policies:
• Configuring a Network Queue QoS Policy
• Creating a Network Queue QoS Policy
• Applying Network Queue QoS Policies
• Configuring Per-VLAN Network Egress Shapers
• Configuring a CIR for Network Egress Unshaped VLANs
• Default Network Queue QoS Policy Values
A basic network queue QoS policy must conform to the following rules.
• Each network queue QoS policy must have a unique policy name.
• Queue parameters can be modified, but not deleted.
5.2.1 Configuring a Network Queue QoS Policy
Configuring and applying QoS policies other than the default policy is optional. A
default network queue policy is applied to network ingress and network egress ports,
as well as the ports on a ring adapter card, which includes the ring ports, the add/
drop port, and the v-port. See Default Network Queue QoS Policy Values for default
values.
Perform the following when creating a network queue policy.
• Enter a network queue policy name. The system does not dynamically assign a
name.
• Include a description. The description provides a brief overview of policy
features.
• Assign a forwarding class. You can assign a forwarding class to a specific queue
after the queue has been created.
To Next Page
Loading...
