Nokia 7705 - 11.2 Basic Configuration; 11.2.1 Creating a Security Queue QoS Policy

Security Queue QoS Policies
464
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
11.2 Basic Configuration
This section contains the following topics related to creating security queue policies:
• Creating a Security Queue QoS Policy
• Default Security Queue Policy Parameter Values
A basic security queue policy must conform to the following rules.
• Each security queue policy must have a unique policy ID.
• Default values can be modified but parameters cannot be deleted.
11.2.1 Creating a Security Queue QoS Policy
Configuring a security queue QoS policy is optional. If no security queue QoS policy
is explicitly defined, the default security queue QoS parameters are applied.
To create a new security queue policy, define the following:
• a security queue policy identifier — the system does not dynamically assign an
identifier
• a description — a brief description of the policy
Use the following CLI syntax to configure a security queue QoS policy:
CLI Syntax: config>qos#
security-queue policy-id
description description-string
queue queue-id
cbs size
high-prio-only percent
mbs size
rate pir [cir]
Note: Queue 1 is always best effort and queue 2 is always expedited.