Quality of Service Guide ATM QoS Traffic Descriptor Profiles
Edition: 01 3HE 11014 AAAC TQZZA 387
8.3 Service Management Tasks
This section describes the following ATM Traffic Descriptor Profile service
management tasks:
• Removing an ATM Traffic Descriptor Profile from the QoS Configuration
• Copying and Overwriting an ATM Traffic Descriptor Profile
• Editing QoS Policies
8.3.1 Removing an ATM Traffic Descriptor Profile from
the QoS Configuration
The default ATM traffic descriptor profile cannot be deleted.
To delete an ATM QoS traffic descriptor profile, enter the following command:
CLI Syntax: config>qos# no atm-td-profile traffic-desc-profile-id
Example: config>qos# no atm-td-profile 3
8.3.2 Copying and Overwriting an ATM Traffic Descriptor
Profile
You can copy an existing profile, rename it with a new profile ID value, or overwrite
an existing profile ID. The overwrite option must be specified or an error occurs if
the destination profile ID exists.
CLI Syntax: config>qos> copy atm-td-profile src-prof dst-prof
[overwrite]
Example: *A:ALU-1#>config>qos# copy atm-td-profile 2 3
A:ALU-48>config>qos# copy atm-td-profile 2 3 overwrite
A:ALU-48>config>qos#
To Next Page
Loading...
