Security Queue QoS Policies
478
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
11.4.2.3 Show Commands
security-queue
Syntax security-queue [policy-id] [association | detail]
Context show>qos
Description This command displays security queue information.
Parameters policy-id — specifies the ID of the security queue policy
Values 1 to 65535
association — displays information about the security queue policy associations
detail — displays detailed information about the security queue policy
Output The following output is an example of security policy information, and Table 69 describes the
fields.
Output Example
*A:7705custDoc:Sar18>show>qos# security-queue detail
===============================================================================
QoS Security Queue Policy
===============================================================================
Security Queue Policy Id (1)
-------------------------------------------------------------------------------
Policy-id :1
Description :Default Security Queue policy
-------------------------------------------------------------------------------
Q CIR PIR CBS MBS HiPrio
-------------------------------------------------------------------------------
1 1500 400000 10 5000000 10
2 3500 400000 40 5000000 10
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
MDA :1/1 (Network Ingress)
MDA :1/1 (Access Ingress)
MDA :1/3 (Network Ingress)
MDA :1/3 (Access Ingress)
MDA :1/4 (Network Ingress)
MDA :1/4 (Access Ingress)
MDA :1/5 (Network Ingress)
MDA :1/5 (Access Ingress)
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.