Nokia 7705 - 6.2.3 Default Service Egress and Ingress Policy Values; 6.2.3.1 Service Egress Policy Defaults

Service Egress and Ingress QoS Policies
274
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
6.2.3 Default Service Egress and Ingress Policy Values
The default service egress and ingress policies are identified as policy-id 1 and have
the default policy name “default”. The default policies cannot be edited or deleted.
The following sections display default policy parameters:
• Service Egress Policy Defaults
• Service Ingress Policy Defaults
6.2.3.1 Service Egress Policy Defaults
The following output shows the service egress policy defaults.
ALU-1>config>qos>info detail
#--------------------------------------------------
#--------------------------------------------------
echo "QoS Policy Configuration"
#--------------------------------------------------
...
sap-egress 1 create
policy-name "default"
description "Default SAP egress QoS policy."
scope template
queue 1 auto-expedite create
adaptation-rule pir closest cir closest
rate max cir 0
cbs default
mbs default
high-prio-only default
slope-policy "default"
...
#--------------------------------------------------
Table 44 lists the service egress policy defaults.
Table 44 Service Egress Policy Defaults
Field Default
policy-name “default”
description Default SAP egress QoS policy
scope template
queue id = 1, type = auto-expedite
adaptation-rule pir = closest, cir = closest