Service Egress and Ingress QoS Policies
324
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
6.4.2.2 Operational Commands
copy
Syntax copy sap-egress src-pol dst-pol [overwrite]
copy sap-ingress src-pol dst-pol [overwrite]
Context config>qos
Description This command copies existing QoS policy entries for a QoS policy ID to another QoS policy
ID.
This command is a configuration level maintenance tool used to create new policies using
existing policies. It also allows bulk modifications to an existing policy with the use of the
overwrite keyword.
Parameters src-pol dst-pol — indicates that the source policy ID and the destination policy ID are
sap-egress or sap-ingress policy IDs. Specify the source policy ID that the copy
command will attempt to copy from and specify the destination policy ID to which the
command will copy a duplicate of the policy.
Values 1 to 65535
overwrite — specifies that the existing destination policy is to be replaced. Everything in
the existing destination policy will be overwritten with the contents of the source
policy. If overwrite is not specified, an error will occur if the destination policy ID
exists.
To Next Page
Loading...
