Quality of Service Guide QoS Fabric Profiles
Edition: 01 3HE 11014 AAAC TQZZA 427
9.3.2.3 Show Commands
fabric-profile
Syntax fabric-profile [policy-id] [association | detail]
Context show>qos
Description This command displays QoS fabric profile information. If policy-id is not included in the
command, the CLI shows a list of fabric policies.
Parameters policy-id — specifies the QoS fabric profile
Values 1 to 256
association — displays all adapter cards to which the specified profile is assigned and
in which direction; that is, network ingress to fabric or access ingress to fabric
detail — displays detailed policy information including policy associations
Output The following output is an example of QoS fabric profile information, and Table 63 describes
the fields.
Output Example
*A:ALU-1>show>qos# fabric-profile
=====================================================================
Fabric Profile
=====================================================================
Policy-Id Mode Description
---------------------------------------------------------------------
1 aggregate Default Fabric Profile QoS policy.
2 aggregate Fast Shaping fabric profile policy.
100 destination
=====================================================================
*A:ALU-1>show>qos# fabric-profile
*A:ALU-1>show>qos# fabric-profile 4 detail
===============================================================================
QoS Fabric Profile
===============================================================================
-------------------------------------------------------------------------------
Fabric Profile Id (4)
-------------------------------------------------------------------------------
Policy-id : 4
Mode : destination
Description : Fabric profile QoS policy 4
-------------------------------------------------------------------------------
Destination MDA Rate (Kbps)
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.