Nokia 7705 - 8.4.2.3 Show Commands

ATM QoS Traffic Descriptor Profiles
402
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
8.4.2.3 Show Commands
atm-td-profile
Syntax atm-td-profile [traffic-desc-profile-id] [detail]
Context show>qos
Description This command displays ATM traffic descriptor profile information.
Parameters traffic-desc-profile-id — displays the ATM traffic descriptor profile
Values 1 to 1000
detail — displays detailed policy information including policy associations
Output The following output is an example of ATM traffic descriptor profile information, and Table 60
describes the fields.
Output Example
*A:ALU-1>show>qos# atm-td-profile 3 detail
===============================================================================
Traffic Descriptor Profile (3)
===============================================================================
-------------------------------------------------------------------------------
TDP-id Description
Service Cat SIR PIR MIR MBS CDVT
-------------------------------------------------------------------------------
3 ATM TD profile3
RT-VBR 500 500 - 500 500
-------------------------------------------------------------------------------
TDP details
-------------------------------------------------------------------------------
Shaping : enabled
Policing : enabled
Descriptor-Type : P0_1andS0_1
-------------------------------------------------------------------------------
Entities using TDP-3
-------------------------------------------------------------------------------
===============================================================================
*A:ALU-1>show>qos#
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.