Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 297
queue
Syntax queue queue-id
no queue
Context config>qos>sap-egress>fc
Description This command specifies the egress queue to which the traffic associated with the forwarding
class is to be forwarded. The command overrides the default queue mapping for fc fc-name.
The specified queue-id must exist within the policy before the mapping can be made. Once
the forwarding class mapping is executed, all traffic classified to the fc-name on a SAP using
this policy will use the indicated queue.
The no form of the command sets the queue-id back to the default queue for the forwarding
class (queue 1).
Default no queue
Parameters queue-id — the service egress queue-id to be associated with the forwarding class. The
queue-id must be an existing queue defined in sap-egress policy-id.
Values 1 to 8
Default 1
To Next Page
Loading...
