Nokia 7705 - Page 220

Network Queue QoS Policies
220
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
config>port>ethernet>network# queue-policy NQ1
config>port>ethernet>network# exit
ALU-1#
The following output displays a network port configuration.
*A:ALU-1>config>port# info
----------------------------------------------
ethernet
network
queue-policy "NQ1"
exit
exit
no shutdown
----------------------------------------------
*A:ALU-1>config>port#
Use the following CLI syntax to apply a network queue policy to v-port egress traffic.
A network queue policy for v-port egress traffic applies DSCP and LSP EXP
classification to traffic flowing from the switching fabric in the IP domain towards the
add/drop port in the bridging domain.
Example: config# port 1/8/v-port
config>port# ethernet network
config>port>ethernet>network# queue-policy
“egr_vp_q_policy”
The following output displays the configuration for an egress queue policy applied to
the v-port.
*A:7705custDoc:Sar18>config>port>ethernet>network# info detail
----------------------------------------------
queue-policy "egr_vp_q_policy"
scheduler-mode 16-priority
----------------------------------------------
A network queue policy for a ring port must be configured as a ring type using the
network-policy-type keyword. The policy operates on ring port egress traffic.
Use the following CLI syntax to apply a network queue policy to a ring port:
CLI Syntax: config>port port-id
ethernet
network
queue-policy name
Example: config# port 1/8/1
config>port# ethernet network
config>port>ethernet>network# queue-policy “NQpolicy5”