Network QoS Policies
192
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
Default policy-id 1: factory setting
policy-id 2 to 65535: policy-id 1 setting
Parameters lsp-exp-value — the 3-bit LSP EXP bit value, expressed as a decimal integer
Values 0 to 7
Default n/a
lsp-exp-out-profile
Syntax lsp-exp-out-profile lsp-exp-value
no lsp-exp-out-profile
Context config>qos>network>egress>fc
Description This command specifies the out-of-profile LSP EXP value for the forwarding class. The EXP
value will be used for all out-of-profile LSP labeled packets requiring marking at egress on
this forwarding class queue.
When multiple EXP values are associated with the forwarding class at network egress, the
last name entered overwrites the previous value.
The no form of this command reverts to the factory default out-of-profile EXP setting for
policy-id 1.
Default policy-id 1: factory setting
policy-id 2 to 65535: policy-id 1 setting
Parameters lsp-exp-value — the 3-bit LSP EXP bit value, expressed as a decimal integer
Values 0 to 7
Default n/a
To Next Page
Loading...
