Quality of Service Guide Network Queue QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 223
The following output displays the network queue policy default configuration.
ALU-1>config>qos>network-queue# info detail
----------------------------------------------
description "Default network queue QoS policy."
queue 1 auto-expedite create
no avg-frame-overhead
rate 100 cir 0
adaptation-rule pir closest cir closest
mbs 5
cbs 0.10
high-prio-only 10
slope-policy "default"
exit
queue 2 auto-expedite create
no avg-frame-overhead
rate 100 cir 25
adaptation-rule pir closest cir closest
mbs 5
cbs 0.25
high-prio-only 10
slope-policy "default"
exit
queue 3 auto-expedite create
no avg-frame-overhead
rate 100 cir 25
adaptation-rule pir closest cir closest
mbs 5
cbs 0.75
high-prio-only 10
slope-policy "default"
exit
queue 4 auto-expedite create
no avg-frame-overhead
rate 100 cir 25
adaptation-rule pir closest cir closest
mbs 2.5
cbs 0.25
Low-2 (l2) 2 Rate = 100%
CIR = 25%
MBS = 5%
CBS = 0.25%
High-Prio-Only = 10%
10 Rate = 100%
CIR = 5%
MBS = 5%
CBS = 0.1%
High-Prio-Only = 10%
Best Effort (be) 1 Rate = 100%
CIR = 0%
MBS = 5%
CBS = 0.1%
High-Prio-Only = 10%
9 Rate = 100%
CIR = 0%
MBS = 5%
CBS = 0.1%
High-Prio-Only = 10%
Table 38 Default Network Queue Policy Definition (Continued)
Forwarding Class Queue Definition Queue Definition