Network Queue QoS Policies
254
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
Policy : policy102
Description : (Not Specified)
Pkt.Byte Offset: sub 62
-------------------------------------------------------------------------------
Queue CIR PIR CBS MBS HiPrio AvgOvrhd Packet Slope-Policy
CIR Rule PIR Rule Offset
-------------------------------------------------------------------------------
1 0 100 def def 10 0.00 def default
closest closest
2 0 100 def def def 0.00 def default
closest closest
9 0 100 def def 10 0.00 def default
closest closest
10 0 100 def def def 0.00 def default
closest closest
-------------------------------------------------------------------------------
FC UCastQ MCastQ
-------------------------------------------------------------------------------
h2 1 9
h1 1 9
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
No Matching Entries
===============================================================================
ALU-1>show>qos#
Table 43 Network Queue Policy Command Output
Label Description
Policy The policy name that uniquely identifies the policy
Description A text string that helps identify the policy’s context in the
configuration file
Pkt.Byte Offset Indicates the value of the packet byte offset applied to the packet for
scheduling, if applicable.
A value of “default” indicates that legacy mode packet scheduling is
in use, in which packets are scheduled based on size including
internal overhead.
Queue The queue ID
CIR The committed information rate
To Next Page
Loading...
