Nokia 7705 - Page 331

Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 331
1 Prio 0 max def def default default
closest closest def
2 Prio 2500 2500 1500 10 default default
closest closest 10
-------------------------------------------------------------------------------
FC UCastQ MCastQ BCastQ UnknownQ
-------------------------------------------------------------------------------
h2 def def def def
ef 6 def 7 def
h1 6 def def def
-------------------------------------------------------------------------------
Dot1p FC Priority
-------------------------------------------------------------------------------
1 be Low
-------------------------------------------------------------------------------
DSCP FC Priority
-------------------------------------------------------------------------------
be be Low
-------------------------------------------------------------------------------
Associations
-------------------------------------------------------------------------------
No Associations Found.
===============================================================================
*A:ALU-1#
Table 48 SAP Ingress Command Output
Label Description
Policy-Id The ID that uniquely identifies the policy
Scope Exclusive - this policy can only be applied to a single SAP
Template - this policy can be applied to multiple SAPs on the
router
Default FC The default forwarding class for the policy
Priority The default enqueuing priority
Name The policy name
Description A text string that helps identify the policy’s context in the
configuration file
Pkt.Byte Offset Indicates the value of the packet byte offset applied to the packet
for scheduling, if applicable.
A value of “default” indicates that legacy mode packet scheduling
is in use, in which packets are scheduled based on size including
internal overhead.
Queue The queue number
Mode The priority mode for the queue