Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 333
UCastQ The unicast forwarding type queue mapping (default or queue
number)
MCastQ The multicast forwarding type queue mapping (default or queue
number)
BCastQ The broadcast forwarding type queue mapping (default or queue
number)
UnknownQ The unknown unicast forwarding type queue mapping (default or
queue number)
Dot1p The forwarding class and/or enqueuing priority when a packet is
marked with a dot1p-value specified
FC The override for the forwarding class
Priority The optional priority setting overrides the default enqueuing
priority for the packets received on an ingress SAP that uses the
policy that matches this rule
High - the high enqueuing parameter for a packet increases the
likelihood of enqueuing the packet when the ingress queue is
congested
Low - the low enqueuing parameter for a packet decreases the
likelihood of enqueuing the packet when the ingress queue is
congested
DSCP The forwarding class and/or enqueuing priority when a packet is
marked with the DiffServ Code Point (DSCP) value
FC One of the predefined forwarding classes in the system. When a
packet matches the rule, the forwarding class is only overridden
when the
fc fc-name parameter is defined on the rule.
Priority The default enqueuing priority overrides for all packets received
on an ingress SAP using this policy that match this rule
High - the high enqueuing parameter for a packet increases the
likelihood of enqueuing the packet when the ingress queue is
congested
Low - the low enqueuing parameter for a packet decreases the
likelihood of enqueuing the packet when the ingress queue is
congested
FC The override for the forwarding class value
Table 48 SAP Ingress Command Output (Continued)
Label Description
To Next Page
Loading...
