ATM QoS Traffic Descriptor Profiles
400
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
pir-val — the Peak Information Rate (including cell overhead) in kb/s
Values 0 to 4294967295
mir-val — the Minimum Desired Information Rate (including cell overhead) in kb/s
Values 0 to 4294967295
mbs-val — the Maximum Burst Size in cells
Values 0 to 4294967295 (this range applies if the atm-td-profile is not
assigned to a SAP)
3 to 256000 (this range applies if the atm-td-profile is assigned to a
SAP, as described above)
cdvt-val — the Cell Delay Variation Tolerance (CDVT) in microseconds
Default CBR/RT-VBR/NRT-VBR/UBR = 250
Values 0 to 4294967295
To Next Page
Loading...
