Nokia 7705 - Page 404

ATM QoS Traffic Descriptor Profiles
404
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
If no optional parameters are specified, the command displays a summary of all defined
SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
Parameters ingress — specifies matching an ingress policy
egress — specifies matching an egress policy
qos-policy-id — identifies the ingress or egress QoS policy for which to display matching
SAPs or SAP aggregation groups. SAP aggregation groups are supported only on
ATM VLLs.
Values 1 to 65535, or qos-policy-name (up to 64 characters)
td-profile-id — displays SAPs using the specified traffic description
Output The following output is an example of SAP information using the atm-td-profile parameter,
and Table 61 describes the fields.
Output Example
*A:ALU-1>show>service# sap-using egress atm-td-profile 3
===============================================================================
Service Access Point Using ATM Traffic Profile 3
===============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Adm Opr
QoS Fltr QoS Fltr
-------------------------------------------------------------------------------
No Matching Entries
The following output shows an example of SAPs and SAP aggregation groups that use the
same QoS policy. SAPs that are members of a SAP aggregation group are not listed by their
port identifiers but are listed under their respective group names. Table 61 describes the
fields.
Output Example
*B:A:179_121# show service sap-using ingress qos-policy 1
===============================================================================
Service Access Points Using Ingress Qos Policy 1
===============================================================================
PortId SvcId Ing. Ing. Egr. Egr. Adm Opr
QoS Fltr QoS Fltr
-------------------------------------------------------------------------------
1/1/3.1:0/100 100 1 none 1 none Up Down
1/1/3.1:3/100 100 1 none 1 none Up Down
1/2/5:200 200 1 none 1 none Up Up
1/1/9.1:3/300 300 1 none 1 none Up Up
bundle-ima-1/1.1:6/601 2001 1 none 1 none Up Up
bundle-ima-1/1.1:6/602 2002 1 none 1 none Up Up
-------------------------------------------------------------------------------
Number of SAPs: 6
-------------------------------------------------------------------------------