Nokia 7705 - 5.10.3 Applying Import and Export Policies

QoS Shapers and Shaper QoS Policies
434
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
Use the following CLI syntax to configure a shaper policy and shaper groups within
the shaper policy:
CLI Syntax: config>qos#
shaper-policy policy-name [create]
description description-string
shaper-group shaper-group-name [create]
description description-string
rate pir-rate [cir cir-rate]
unshaped-sap-shaper-group shaper-group-name
Example: config>qos
config>qos$ shaper-policy "shaper_policy_2" create
config>qos>shaper-policy$ shaper-group “sg1”
config>qos>shaper-policy>shaper-group$ rate 1000 cir 200
config>qos>shaper-policy>shaper-group$ exit
config>qos>shaper-policy$ shaper-group “unshaped_sg1”
config>qos>shaper-policy>shaper-group$ rate 500 cir 100
config>qos>shaper-policy>shaper-group$ exit
config>qos>shaper-policy>unshaped-sap-shaper-group$
“unshaped_sg1”
config>qos>shaper-policy$ exit
config>qos$
The following output shows the configuration for “shaper_policy_2”:
*A:7705custDoc:Sar18>config>qos# info detail
#--------------------------------------------------
....
shaper-policy "shaper_policy_2" create
no description
shaper-group default create
description "Default Shaper Group."
rate max cir 0
exit
shaper-group sg1 create
description "Shaper Group_1"
rate 1000 cir 200
exit
shaper-group unshaped_sg1 create
no description
rate 500 cir 100
exit
unshaped-sap-shaper-group unshaped_sg1
exit
.....
#--------------------------------------------------
*A:7705custDoc:Sar18>config>qos#