QoS and QoS Policies
60
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
Figure 11 and Figure 12 show network ingress scheduling for per-destination and
aggregate modes, which are configured under the fabric-profile command. Traffic
arriving on a network port is examined for its destination MDA and directed to the
QoS block that sends traffic to the appropriate MDA. There is one set of queues for
each block, and an additional set for multipoint traffic.
In Figure 11, there is one per-destination shaper for each destination MDA. In
Figure 12, there is a single shaper to handle all the traffic.
To Next Page
Loading...
