ACCESS GATEWAY
System Administration 73
Portal XML Post Port
Support GIS Clients (enabled or disabled)
GIS stands for Generic Interface Specification, a document written by iPass.
Enabling the Smart Client option in the Access Gateway automatically supports all GIS
compliant clients using the Internal Web Server. Enabling “Support for GIS Clients” under
the Portal Page feature means that the Access Gateway will defer the management of the
GIS clients to the Portal Page server.
Block IWS Login Page (enabled or disabled)
5.
Enable or disable the Usernames feature, as required (refer to the table in Enabling AAA Services with
the Internal Web Server on page 71).
Some subscribers may want additional account flexibility and security for their services (for example, if
they use more than one computer and their MAC address changes, or if they move between port-
locations). In this case, a subscriber can define a unique user name and password which they can use from
any machine or location (without being re- charged). Subscribers who choose this option are prompted for
their user name and password whenever they try to access the Internet. Solution providers can charge a
fee for this service.
6.
Enable or disable the New Subscribers feature (refer to the table in Enabling AAA Services with the
Internal Web Server on page 71).
New Subscribers must be enabled before enabling the PayPal and PMS options.
7.
If you enabled New Subscribers, enable or disable the Relogin After Timeout option.
8.
You can now enable or disable the PayPal feature. When this feature is enabled, subscribers are
prompted to enter either their PayPal account information or their credit card information (for billing
purposes). The Access Gateway is configured to use PayPal. You will need to open a business account
with PayPal before this feature can be used.
Please contact Nomadix Technical Support for assistance. Refer to Contact Information on page 268.
All data communications between the Access Gateway and PayPal are encrypted by the
SSL (Secure Sockets Layer) protocol. The Access Gateway never “sees” subscriber credit
card numbers.
9.
If the PayPal Service is enabled, enter the information for the following fields:
PayPal App Name
Check whether this is a live environment. Leave unchecked if it is a sandbox /testing environment
Client ID
Set the Secret Code
WebHook ID
All the above settings will be obtained when creating the PayPal Business account. Please
contact Support for documentation explaining the setup of the PayPal account.
10.
Enable or disable Smart Client Support, as required.
11.
Click on the Save button to save your changes, click on Save then Reboot to reboot the Access Gateway
and make the changes take effect immediately, or click on the Restore button if you want to reset all the
values to their previous state.
To Next Page
Loading...
