Program Point Program
48 NFS-3030 Programming Manual P/N 51345:C 11/4/03
Programming Menu
Figure 3.39 Edit Logic Equation Screen
The cursor will be present in the equation, and can be moved by pressing the left/right arrow keys
on the keyboard. To add or delete information, use the INS/OVR soft key function described
below. Use the keypad to type in an equation. The ADD POINT/ZONE and ADD LOGIC
FUNCTION soft keys may be used to facilitate creating a logic equation; however, commas must be
added by using the keypad.
Soft Keys
INS/OVR: Press to toggle between insert and overwrite. Stop at the appropriate mode, which
displays in line 8 of the screen. Insert will add information to the equation, overwrite will write
over information already in the equation.
ADD POINT/ZONE: Press to proceed to the Add Point/Zone screen. This screen is an alternative
to typing in the information at this screen; it provides point and zone formats that make it less likely
for typographical errors to occur.
ADD LOGIC FUNCTION: Press to proceed to the Add Logic Function screen. This screen is an
alternative to typing in the information at this screen; it provides logic function formats that make it
less likely for typographical errors to occur.
ADD TIME/DATE: Press to proceed to the Add Time/Date screen.
DELETE EQUATION: Press to delete the entire equation.
ACCEPT: Press to save changes made on this screen and return to the previous screen.
Note: When the ACCEPT soft key is pressed to save an equation, the panel checks the equation for
errors. If there is an error in the equation, the previous screen will not appear, and the cursor will
appear at the error point. Correct the equation, and re-press the ACCEPT: soft key.
LOGIC ZONE PROGRAMMING MENU
LOGIC ZONE ZLxxxx
AUTOMATIC OFF INS/OVR
AND(Z20,OR(L2D159,L2D14))
INSERT
ADD POINT/ZONE DELETE EQUATION
ADD LOGIC FUNCTION ACCEPT
ADD TIME/DATE BACK
INSERT or OVERWRITE displays here.
www.PDF-Zoo.com
To Next Page
Loading...
Need help?
General
