Application Corrupt Screen Service Screens
NFS-3030 Programming Manual P/N 51345:C 11/4/03 75
5.5 Application Corrupt Screen
During power-up, the panel checks the image integrity of the application code. If the code is
corrupt, the panel cannot proceed, and the following screen is displayed. The user must use VeriFire
to download the application code. Usually this screen results from a power interrupt during a
critical period of application download. The trouble LED will flash and the piezo (if enabled) will
pulse while this screen is in effect.
Figure 5.9 Application Corrupt Screen
TROUBLE
EPROM ERROR
LAKEVIEW GENERAL HOSPITAL
BOOTLOADER
11:58:45A WED JUL 17, 2002
ACKNOWLEDGE
PERFORM DOWNLOAD
www.PDF-Zoo.com
To Next Page
Loading...
Need help?
General
