GROUP TEMPERATURE
The temperature of the delivery group can be set.
By pressing the ENTER key the submenu
can be accessed; keys
let you increase/
diminish the temperature of the water in the coffee
boiler (min. 50°C max. 105°C.) Press
ENTER
to confirm settings.
Press RESET to exit submenu.
MAINTENANCE
Press ENTER
to open the sub-menu.
It's possible to set the maintenance time and the
number of maintenance cycles (recommended
25000 for the first maintenance).
Press
ENTER
to confirm settings and, then,
reset
to exit sub-menu.
GROUNDS NUMBER
It is possible to programme the number of cycles
after which it is necessary to empty out the dregs
drawer.
Pressing
ENTER
it is possible to enter the
sub menu; the
keys are used to increase/
decrease the number of the cycles (min. 0 coun-
ter disabled, 1,2,3…100 - 150 - 200 - 250). Press
ENTER
to confirm settings. Press RESET
to quit the submenu. To reset the cycle count for
emptying the dregs drawer, remove the drawer for at
least 15 seconds.
Edition 02 to 02/2014
12.11
SERVICE MANUAL
Fig. 288
03:58
Fig. 289
04:07
Fig. 290
04:13
Fig. 291
04:18
To Next Page
Loading...
