- 26 -
Tip:
Use the “Guide line” mode to compose images easily
before shooting images.
NOTE:
When the LCD display is not showing “OSD on”, pressing
Macro, Self-timer or Flash will change the display mode
to “OSD on” automatically.
Recording
Recording Still Images
1. Set the Nytech DS-5200 to the Record mode (see page 14).
2. Hold the camera with both hands and make sure the camera
is stable.
3. Aim the focus area to the subject that you want to take and
press the shutter release button halfway.
The focus area on the LCD monitor will light green when
the camera is in focus.
If the shutter speed is slow or there is the possibility that
the image may be blurred, the shake warning icon
may
appear on the LCD monitor. To avoid this, use a tripod to
stabilize the camera when recording images.
4. Fully press the shutter release button to take an image.
To Next Page
Loading...
