- 28 -
When the optical zoom factor is at maximum, zooming stops
temporarily. If you press the [T] again, the camera switches to
the digital zoom automatically and zooming continues.
Digital zoom works by enlarging the center portion of an image
through a software interpolation process. The digital zoom is
used to achieve magnification levels up to approx. 4 times.
NOTE:
Digital zoom is unavailable when recording movies.
Using the Flash
Press the flash button cycles your Nytech DS-5200 through the
various flash modes. A symbol appears on the LCD screen to
indicate the flash mode. The flash cannot be used when movie
recording.
1. Set the camera to the Record
mode (see page 18).
The flash function can only be
used when shooting still
images.
To Next Page
Loading...
