Nytech DS-5200 - Setting the ISO

- 38 -
Use this for adjusting the white balance
manually for more accurate adjustment or
when the light source cannot be specified.
Point the camera at a white piece of
paper or similar object under the lighting
conditions for which you want to set the
white balance, and then press the
SET
button.
Setting the ISO
With the initial settings, the ISO sensitivity is automatically set
according to the brightness of the subject.
Option Description
Auto Sets the ISO sensitivity automatically.
ISO 50 Sets the sensitivity to ISO 50 equivalent.
ISO 100
Sets the sensitivity to ISO 100
equivalent.
ISO 200
Sets the sensitivity to ISO 200
equivalent.
NOTE:
 Higher ISO speeds increase the image noise. To take
clean images, use as low an ISO speed as possible.