Nytech DS-5200 - Setting the Power Save

- 55 -
5 sec.
The captured image will display for 5
seconds after shooting.
Setting the Power Save
For power saving, you can set the LCD or the camera to turn off
automatically for a period of time. For detailed operation, see
page 22.
Option Description
Off Does not activate the power save mode.
1 min.
Auto turns off the LCD monitor when the
camera has not been used for 1 minute.
3 min.
Auto turns off the LCD monitor when the
camera has not been used for 3
minutes.
5 min.
Auto turns off the LCD monitor when the
camera has not been used for 5
minutes.