- 51 -
Setting the DPOF
The Digital Print Order Format (DPOF) setting allows you to
select images on the memory card for printing and specify the
number of print copies in advance using the Nytech DS-5200.
This is extremely convenient for sending the images to a photo
developing service or for printing on a direct print function
compatible printer.
1. Set the camera to the Playback mode
(see page 18).
2. Press the MENU button then use
or
to select DPOF ( ).
3. Press
or to select SINGLE,
then press the SET button.
4. Press
or to select the image you want to print out.
5. Press
or to specify the number of copies and press the
set button to confirm.
The number of copies can be set from 0 to 30.
To cancel this image DPOF setting, set the number of
copies to 0.
6. Repeat step 4~5 to set other images for printing.
7. After you have finished all image settings, press the MENU
button to apply it.
Tip:
To set the DPOF setting for all images in one go, select ALL
in step 3 and press the SET button.
To Next Page
Loading...
