Nytech DS-5200 - Adding Stickers to a Still Image

- 50 -
Adding Stickers to a Still Image
1. Set the camera to the Playback mode (see page 18).
2. Press
or to select the image to which you want to add
stickers.
3. Press the MENU button, then press
or to select
STICKER (
).
4. Press the SET button to enter the sticker screen.
5. Press
or to select a desired sticker, and then press the
SET button. The selected sticker shows up on the image.
 Use the arrow button to move the sticker or press the zoom
lever to rotate the sticker.
6. Press the SET button and repeat step 5 to continue selecting
stickers.
7. Press the MENU button to display a confirmation message.
8. Press the SET button to confirm the change or press the
MENU button to cancel without saving the file.
 The image with added stickers will be saved with a new file
name.