- 63 -
Connecting the Camera to a Computer with a USB Cable
1. Install the USB software driver
included with the bundled CD-ROM
(only for Windows 98SE).
2. Connect the supplied USB cable to
the computer’s USB port.
3. Turn on the camera.
4. The LCD screen turns off when
connection to the computer has
been successfully completed.
5. Open My Computer or Windows
Explorer. A “Removable Disk”
appears in the drive list.
6. Double-click the “Removable Disk”
icon to view its contents.
7. Files stored on camera are located
in the folder name “DCIM”.
NOTE:
You do not have to turn off the computer or camera when
making this connection.
Refer to your computer manual for information regarding the
USB port location.
The camera will turn off automatically if the USB cable is
disconnected.
Windows 98SE: If this is the first time the camera has been
connected to the computer, Windows detects the camera as
an “Unknown device” and automatically completes the
required software installation.
To Next Page
Loading...
