Nytech DS-5200 - Setting the Tv out; Setting Usb Port

- 58 -
 Reset the file number and plug in a new memory card, see
page 56.
 Format the memory (see page 60). The folder number and file
number are initialized and renumbered from 100 and 0001
respectively.
NOTE:
 Do not change the folder and file names in the memory card
using your computer. It may be impossible to play back the
data using the digital camera.
Setting the TV Out
Your Nytech DS-5200 can be connected to a TV allowing you to
preview images and movie clips on the television screen. TV Out
should be set to either NTSC or PAL depending on your region.
For detailed operation, see pages 22, 61.
Option Description
NTSC America, Japan, Taiwan, Korea
PAL All of Europe
Setting USB Port
You can set USB mode to connect the camera with a printer or
computer. For detailed operation, see pages 22, 63.
Option Description
Computer To connect your camera to a PC.
Printer To connect your camera to a printer.