Nytech DS-5200 - Page 71

- 71 -
The camera was
moving when the
image was
captured.
Hold the camera
steady when shooting
a picture.
Image is blurred or
out of focus.
The subject was
beyond the range
within which the
camera can focus.
Turn the Macro mode
on if the subject is
within 10 cm (zoom
out) or 80 cm (zoom
in).
Do not use Macro
mode when shooting
distant subjects.
Image is not
displayed on the
LCD monitor.
A memory card
with non-DCIF
images (recorded
with another
camera) is loaded.
This camera cannot
display non-DCIF
images.
Recorded images
are not saved to
memory.
The camera was
turned off/powered
down before the
image was stored
to memory.
If the battery low
indicator appears on
the LCD monitor,
replace the battery
immediately.
Cannot transfer
images to a
computer after
connecting the
USB cable.
USB driver is not
installed.
Install the USB driver
before you connect the
camera to a computer /
turn the camera on.