Océ Power Logic: Settings Editor (for the key operator) 153
Job-related settings for copying
Custom card
Description The option ‘Custom card’ allows you to define the custom
card on the scanner operator panel.
Min/max values N/A
Menu path Jobs - Copy & File - Defaults
Checkprint
Description Use ‘Checkprint’, to define that a paper copy will be made of
each scanned original.
Min/max values N/A
Menu path Jobs - Copy & File - Defaults - Checkprint
Number of prints/sets
Description Use ‘Number of prints/sets’, to define the default number of
copies for each job in the printer memory.
The default value is 1. The maximum number of copies is 999.
Min/max values 1-999
Menu path Jobs - Copy & File - Defaults - Number of prints/sets
Output mode
Description The option ‘Output mode’ allows you to define the
destination of the output: Copy: the output will be printed on
paper. File: the output is saved as a print file and can be print-
ed on paper at a later time.
Min/max values N/A
Menu path Jobs - Copy & File - Defaults - Output mode
Mirror
Description You can use the ‘Mirror’ option to print a horizontally mir-
rored image of an original.
Mirroring is performed in the vertical axis.
Min/max values N/A
Menu path Jobs - Copy & File - Defaults - Mirror
To Next Page
