Introduction 19
Océ TDS600 components
The Océ TDS600 is available as a digital network printer, a scanner or as a full
hybrid machine with which you can print, copy or scan to file. It consists of the
following components (see figure 1 on page 14):
■
Printer
■
Scanner
■
Océ Power Logic Controller
These components, in combination with your network, Océ Print Exec LT Web
and one or more drivers (Windows driver, AutoCAD HDI or PostScript), allow
you to use the Océ TDS600 as your default enterprise printing and copying
solution.
See the Océ TDS600 Connectivity Manual for more details about making
networking settings on the Océ TDS600 printer. You find more information
about installing, configuring and using drivers in the documentation provided
with the drivers.
Note:
All Océ drivers (except PostScript 3) can be freely downloaded from the
World Wide Web at www.oce.com.
Océ TDS600 printer
The Océ TDS600 printer has the ability to contain two rolls in a single drawer
(the minimum configuration) to a maximum of six rolls with one sheet feeder
and four rolls with three sheet feeders.The printer delivers your jobs on the
integrated receiving tray, on top of the printer.
You can optionally buy:
■
a copy delivery tray
■
a folder to fold the output
■
a reinforcement unit to add a reinforcement strip to folded output
To Next Page
Loading...
