Oce TDS600 - Safety Data Sheet B5 Toner

320 Océ TDS600 Multifunctional Digital System User Manual
Safety data sheet B5 toner
continued on next page
MATERIAL SAFETY DATA SHEET Number E-199-a-UK
(93/112/EEC and ISO 11014-1) Date October 1997
Page 1of2
Océ B5 Toner
1. Product and company identification
Product name Océ B5 Toner
Packing Polyethylene bottle, contents 0,45 kg/1.1 lb
C
ompany
O
c
é (UK) L
t
d
.
Address Langston Road, Loughton, Essex IG10 3SL
Telephone 0181-508 5544 (contact product safety coordinator)
Telefax 0181-508 6689
2. Composition / information on ingredients
3. Hazards identification
In a toner dust cloud the formation of an explosive dust-air mixture is possible.
Toner dust may cause discomfort for the eyes and respiratory tract, in the same manner as inert nuisance dust.
To our knowledge, with due observance of the recommended exposure limit and of normal hygiene this product presents no health hazard
in normal use.
4. First aid measures
Eyes contact Rinse with plenty of water.
Skin contact Wash with cold water and soap.
Inhalation Clean nose, mouth, throat. Cough up. Fresh air.
Ingestion Rinse mouth with water. If large quantity swallowed seek medical advice.
For any medical advice take along this material safety data sheet.
5. Fire fighting measures
Extinguishing media Dry chemical, carbon dioxide, water spray (fog), foam
Special fire fighting precautions N.A.
Hazardous products of decomposition N.A.
6. Accidental release measures
Spills can be cleaned with a vacuum cleaner or a damp rag. Do not use warm water, because this makes the powder soft and sticky.
7. Handling and storage
Keep bottle tightly closed to prevent dust formation. Handle carefully. Avoid breathing dust.
No special technical measures for storage.
8. Exposure controls / personal protection
No special technical measures. No personal protective equipment needed.
Industrial hygiene: after skin contact wash with cold water and soap.
Threshold Limit Value for:
* nuisance dust 10 mg/m
3
* carbon black 3,5 mg/m
3
* amorphous silica 10 mg/m
3
Ingredients CAS No. Classi?cation Weight %
Polyester resin 170831-75-1 25-50
Phenoxy resin PMN P-95-461 25-50
Iron oxide 1317-61-9 10-25
Carbon black 1333-86-4 1-5
Amorphous Silica 68611-44-9 <1
Pigment <1