88 Océ TDS600 Multifunctional Digital System User Manual
Note:
You can retrieve help about Océ View Station LT via Océ Scan Manager.
Function buttons
Below the menu’s there are function buttons in a ribbon. This ribbon can be
turned on and off (see ‘View ribbon’ on page 87).
[51] Function buttons in Océ View Station LT
Figure 51 displays the buttons:
1 Invert: Reverses the black and white parts of the image.
2 Fit: Scales the image to fill the window.
3 1:1: Displays the image at a 1:1 scale factor.
4 Magnify: Zooms into the page.
5 Reduce: Zooms out of the page.
6 Mirror: Mirrors the image.
7 Rotate 90 CCW: Rotates the image 90 degrees counter-clockwise.
8 Rotate 90 CW: Rotates the image 90 degrees clockwise.
9 Rotate 180: Rotates the image 180 degrees.
10 Measurement When active, allows you to measure lines and areas on the
image.
Reference Reference displays or removes a small, usually floating win-
dow. This window displays the entire current page in miniature.
The crossed box inside the Reference window indicates which
part of the page is displayed in the document window.
By moving or resizing the crossed box, you change which area
of the page is displayed.
Detail Displays or removes the Detail window.
Measurement When active, allows you to measure lines and areas on the im-
age.
Help menu
Command What does it do?
About Shows information about Océ View Station LT.
Preference menu
234 5 6 8 9 10111217
To Next Page
