Oce TDS600 - Problems with the Reinforcement Unit

282 Océ TDS600 Multifunctional Digital System User Manual
Problems with the Reinforcement Unit
If a reinforcement unit is installed, the following errors can occur:
■
Paper jams
■
Tape jams
■
No reinforcement strips on the output
This section explains how these errors can be solved.
Clear paper jams in the Reinforcement Unit
When a paper error occurs, the following message is displayed: ‘Paper jam’. A
picture of the engine appears on the display with one or two doors blinking,
depending on where the jam occurs (see figure 182).
[182] Paper jam
▼
▼▼
▼
How to clear a paper jam
1
Open the cover of the transport to the First Fold delivery and remove all paper
inside (see figure 183).