252 Océ TDS600 Multifunctional Digital System User Manual
Maintenance of the glass platen and the
reference roller
If the glass platen is dirty or static, it should be cleaned to ensure top quality
copies are produced. At the same time you can clean the white reference roller.
▼
▼▼
▼
Clean the glass platen and reference roller
1
Switch off the scanner.
2
Open the top cover of the scanner (see figure 139).
[139] Opening the top cover of the scanner
3
Clean the glass platen with a soft cloth moistened with water (see figure 140).
[140] Glass platen and reference roller
To Next Page
