Oce TDS600 - Page 222

222 Océ TDS600 Multifunctional Digital System User Manual
2 Open the ‘Connectivity’ folder.
3 Open the folder with the appropriate connection type.
4 Select any of the available options for the selected connection type.
5 Change the setting in the update area, as appropriate.
6 Click on the ‘Apply’ button to save any changes you have made.
See the TDS Connectivity Manual on the ‘
User Documentation and Remote
Applications CD-ROM
’, which is delivered with the system, for detailed
information about making the Océ TDS600 available in your particular
network configuration.
FTP
Setting Description
Enable FTP To define if FTP communication is enabled or disabled.
Time-out To define the plot time-out on a FTP connection.
60 - 900 s
Communication
mode
To define the communication mode for a FTP connection.
With Print while spool the data will be spooled in chunks.
With Spool then print the complete job will be spooled before
printing starts.
PDL selection To define the PDL enabled for a FTP connection. The Auto-
matic option enables Automatic Language Sensing.
LPD
Setting Description
Enable LPD To define if LPD communication is enabled or disabled.
Communication
mode
To define the communication mode for a LPD connection.
With Print while spool the data will be spooled in chunks.
With Spool then print the complete job will be spooled before
printing starts.
PDL selection To define the PDL enabled for a LPD connection. The Auto-
matic option enables Automatic Language Sensing.