Oki C542dn - Administrator Setup; Changing Admin Setup

- 123 -
5. Operating Management/ Specifications
Administrator Setup
This section describes how to change items in Admin Setup.
The settings that you can change in [Admin Setup] are as follows.
The factory default administrator name and password are "admin" and "999999",
respectively. Use them if any administrator names have not been registered yet.
• Changing Admin Setup
• Print From USB Memory Setup
• Print Setup
• Network Menu
• Configure Home Screen
• Manage Unit
• User Install
To change the administrator settings, the administrator name and password are required.
The factory default administrator name and password are "admin" and "999999" respectively.
Use them if any administrator names have not been registered yet. If the administrator
password is changed, enter the updated password.
1
Press [Device Settings] on the touch panel.
2
Press or several times and press [Admin Setup].
3
Enter the administrator name and password and press [OK].
4
Touch an item you want to change, and then change the setting.
5
Press [Back] to display the previous screen.
If you have items to change, operate continuously.
When you change all the items, press (Home).
Changing Admin Setup