- 66 -
2. Print
3
Select [Reverse] for [Page Order] on the [Paper Handling] panel.
4
Change other settings if necessary, and then click [Print].
If setting details are not displayed in the print dialog, click [Show Details] at the bottom of the dialog.
• Setting the MP Tray
• For Windows PCL Printer Driver
• For Windows PS Printer Driver
• For Mac OS X
You can automatically select a tray (paper cassette (Tray 1/2/3) or the MP tray) that holds
paper of the same size and type that is set with the printer driver. Trays switch in accordance
with the [Tray Sequence] setting.
Be sure to set the paper size and weight for paper cassettes and the MP tray on the touch panel.
Loading Paper (User's Manual)
Setting the MP Tray
Set the MP tray as a target of the auto tray selection.
1
Press [Device Settings] on the touch panel.
2
Press [Paper Setup].
3
Press [MP Tray].
4
Press [MP Tray Usage].
5
Press [Normal Tray].
[MP Tray Usage] is set to [Do Not Use] by factory default.
6
Press [Back] until the home screen is displayed.
For Windows PCL Printer Driver
1
Open the file to print.
2
Select [Print] from the [File] menu.
Selecting a Tray Automatically for the Specified Paper
To Next Page
Loading...
Need help?
General
