Oki C542dn - Using a Registered Macro; Editing a Macro Title

- 22 -
1. Basic Operations
You can use a macro by reading out it.
1
Press [Job Macro] on the touch panel.
2
Select a macro to use, and then press [Apply].
If the access control is enabled on the functions you want to use, a message is
displayed to inform you that you are not permitted to use them, and the screen returns
to the JOB MACRO menu.
3
Perform a job.
You can edit a macro title.
1
Press [Job Macro].
2
Press [Edit].
3
Select a macro, and then press [Title Edit].
4
Enter a new title.
Entering Characters (User's Manual)
5
Press [OK].
Using a Registered Macro Editing a Macro Title