Oki C542dn Advanced Manual

- 131 -
5. Operating Management/ Specifications
LDAP Server Setting
Secure Protocol Server Setting
To apply the settings that are changed on the [Network Menu] menu, you must restart a network card. Restart the
network card according to a confirmation screen that is displayed when you change settings.
POP Password (NULL) Sets a login password to the server used for POP
certification or for printing received e-mail
attachment files.
Item Factory default setting Description
Server Setting LDAP Server (NULL) Sets the IP address or server name for the LDAP
server.
Port No. 389 Sets the port number for the LDAP server.
Available range: 1 to 65535
Timeout 30 seconds Sets the timeout value for the search response from
the LDAP server.
Available range: 10 to 120 seconds
Search Root (NULL) Specifies a position to start searching the LDAP
directory.
Authentication Method Anonymous Sets the authentication method.
For Digest-MD5, the DNS server must be set. For
Secure Protocol, the SNTP server, DNS server, and
secure protocol server must be set.
User ID (NULL) Sets a user ID for LDAP server authentication. You
can enter up to 80 characters.
This item is displayed when the LDAP
authentication method is not set to [Anonymous].
Password (NULL) Sets a password for LDAP server authentication.
You can enter up to 32 characters.
This item is displayed when the LDAP
authentication method is not set to [Anonymous].
Encryption None Sets the encryption of communication to the LDAP
server.
Item Factory default setting Description
Domain (NULL) Sets a realm name for the Kerberos certification.
Use upper-case letters for alphabets.You can enter
up to 64 characters.
Item Factory default setting Description
Configure Home Screen
Factory default setting Description
Print
Troubleshoot
Register frequently-used functions on the Home Screen.

Oki C542dn Specifications

General

Brand	Oki
Model	C542dn
Category	Printer
Language	English