Oki C542dn Advanced Manual

- 153 -
5. Operating Management/ Specifications
Only when Point Calculation Type is a default setting, the setting is available on the Web page of the machine. If [Cost
Settings] is not displayed, check the Point Calculation Type setting.
Set numbers of points for paper size and Color/Mono (Grayscale). For example, you can set
so that bigger size paper needs more points or color printing needs more points than
grayscale printing. Points are charged on a page-by-page basis, so when you print two
pages, you need twice as much as the set rate.
In addition, you can apply point reduction system for two-sided printing or saving toner to
print. The reduction rate for saving toner also depends on [Toner Saving Calculation Setting].
1
Open the Web page of the machine.
Open the Web Page of This Machine
2
Log in as the administrator.
Log In as the Administrator
3
Click [Account Management].
4
Click [Cost Settings].
5
Click [Paper Size Points Settings] or [Toner Points Settings].
The setting screen opens separately.
Setting Paper Size Points/Toner Points

Oki C542dn Specifications

General

Brand	Oki
Model	C542dn
Category	Printer
Language	English