- 134 -
5. Operating Management/ Specifications
*1 A message is displayed to confirm the equipment restarts. Select [Yes] to continue. Select [No] to cancel.
User Install
Item Factory
default
setting
Description
Time Zone 00:00 Sets the time GMT zone.
Available range: -12:00 to +13:00 (15 minutes / increment)
Daylight Saving ON Sets whether to enable the Daylight Saving mode.
Time
Setup
Auto
Setup
SNTP
Server
(Primary)
Sets the SNTP server to use for setting the current date and
time. You can enter up to 64 characters.
SNTP
Server
(Secondar
y)
Manual Setup 2001/01/01 0:00 Sets the current date and time manually.
Power
Setup
Auto Power Off Auto Config Sets the behavior of Automatic Power Off.
Power Supply Return State Continue Sets a power supply method at the time of recovery from the
power failure.
Select [Manual] if you do not want to make the machine
automatically to turn on after the recovery.
Office Document Mode Mode1 This mode allows to always enable the toner save function.
To forcibly enter the machine in toner save mode, select Mode2.
High Humid Mode OFF Sets whether to enable the humidity mode.
Selecting [Enable] reduces curl generated while printing.
Quiet Mode OFF Sets whether to reduce the printing noise.
Setting to [ON] affects printing speed.
Drum Near Life Timing 1000 Sets the timing for the near life warning for the drum cartridges.
Fuser Near Life Timing 1000 Sets the timing for the near life warning for the fuser unit.
Belt Near Life Timing 1000 Sets the timing for the near life warning for the belt unit.
Wireless Module Disable Sets whether to enable or disable wireless LAN.
Erase Privacy Data*
1
- Deletes the registered privacy data.
• Values set to the Admin Password and other menu items.
• Various histories
• Access control information and user information registered to
the device
Business
Phone
Setup
Business Phone
Cooperation
Disable Sets whether to enable or disable Business Phone Cooperation.
Connection IP
Address
0.0.0.0 Sets the IP address of the connected device.
Connection Port No. 59000 Sets a port number of the connected device.