- 156 -
5. Operating Management/ Specifications
If the Account Management is enabled and the remaining points run out, printing stops and
the job will automatically be deleted after a certain period of time (The factory default setting
is 40 seconds.) elapses.
If jobs are not executed, ask your administrator for checking your balance in [Summary
Account Settings]. The period of time from when the shortage of points is detected to when
the machine deletes the job can be set on the web page of the machine.
If printing stops due to point shortage, you need to cancel the current job or add points and
complete printing to execute the next print jobs.
Contact the administrator if you want to check your balance yourself.
Precautions when Operating
To Next Page
Loading...
Need help?
General
