- 83 -
3. Maintenance
Cleaning Each Part of the Machine
This section describes how to clean the machine and parts.
• Cleaning the Surface of the Machine
• Cleaning the Paper Feed Rollers (Tray 1/Tray 2/Tray 3)
• Cleaning the Paper Feed Rollers (MP Tray)
• Cleaning the LED Head (User's Manual)
• Do not use benzine, thinners, or alcohol, because they may damage the plastic parts of the machine.
• Do not lubricate the machine with oil. Do not apply oil.
1
Turn off the machine.
Turning Off the Machine (User's Manual)
2
Wipe the surface of the machine with a soft cloth that has been slightly
moistened with water or neutral detergent and then squeezed well.
Do not use other than water or neutral detergent.
3
Dry the surface of the machine with a dry soft cloth.
Cleaning the Surface of the Machine
To Next Page
Loading...
