- 217 -
7. Utility Software
13
Click [Print Palette] and check that the adjusted color is closer to the color you
want.
If you want to change the color more or change other colors, repeat steps 9 to 13.
14
Enter a name and then click [Save].
15
Select [Printers & Scanners] from [System Preferences] to delete and
reregister all machines for which adjustments were made.
You can adjust tone by adjusting the gamma value and output color by adjusting the hue.
• For Windows
1
Click [Start] and select [All Programs] > [Okidata] > [Color Correct Utility] >
[Color Correct Utility].
2
Select [Hue & Saturation Tuning.] and then click [Next].
3
Select the machine and click [Next].
4
Select the standard mode and click [Next].
If the settings are initialized after the printer driver is updated or reinstalled, start Color Correct Utility to reset the
color correction name automatically. Please check that the color correction name is displayed on the [Select
Setting] screen.
5
Apply settings as necessary by adjusting the slide bar.
If you select the [Use printer's unadjusted color] check box, 100 percent of each color is
used for printing, and the slide bar of hue is fixed.
6
Click [Print Test].
7
Check the print result.
If you are not satisfied with the result, repeat steps 5 to 7.
8
Click [Next].
9
Enter a name and then click [Save].
A dialog appears.
10
Click [OK].
11
Click [Finish].
• For Mac OS X
1
Launch Color Correct Utility.
Changing Gamma Value or Hue
To Next Page
Loading...
Need help?
General
