Oki C542dn Advanced Manual

- 130 -
5. Operating Management/ Specifications
• Wireless(AP Mode) Setting (If wireless LAN module fitted)
• Factory Defaults
Mail Server Setup
Network Setting IP
Address
Set
Auto Sets the method of assigning an IP address.
IPv4
Address
192.168.101.100 Sets an IP address.
This item is displayed when TCP/IP protocol is
enabled.
Subnet
Mask
255.255.255.0 Sets a subnet mask.
This item is displayed when TCP/IP protocol is
enabled.
Gateway
Address
0.0.0.0 Sets a gateway address.
This item is displayed when TCP/IP protocol is
enabled.
DHCPv6 Disable Specify whether to enable DHCP when using IPv6.
Automatic Setup
(WPS)
WPS-
PBC
- WPS-PBC is executed.
WPS-PIN - WPS-PIN is executed.
Wireless
Network
Selection
A list of access point
name found in the
search
- Displays a list of wireless LAN access points'
names that are found in a search.
Manual
Setup
SSID (NULL) Enter an SSID.
Security Disable Selects the security of the wireless LAN function.
[WPA/WPA2-EAP] and [WPA2-EAP] can be set
only on the Web.
WEP Key (NULL) Displays if [Security] is set to [WEP].
Enter the WEP key.
WPA
Encryptio
n Type
AES Select a WPA2-PSK encryption type.
Displays if [WPA/WPA2-PSK] or [WPA2-PSK] is
selected for [Security].
WPA Pre-
shared
Key
(NULL) Enter the Pre-shared Key.
Displays if [WPA/WPA2-PSK] or [WPA2-PSK] is
selected for [Security].
Wireless reconnection - Wireless(Infrastructure) reconnection is executed.
Item Factory default setting Description
Wireless(AP Mode) Disable Sets whether to enable Wireless(AP Mode).
Automatic connection (push-
button)
- Connects automatically (push button) using
Wireless(AP Mode).
Manual Setup SSID (Device-specific string) Displays SSID of Wireless(AP Mode).
Password (8-digit number) Displays the password of Wireless(AP Mode).
Item Factory default setting Description
Connection
Setting
SSID (Device-specific string) Sets SSID of Wireless(AP Mode).
Password (8-digit number) Sets the password of Wireless(AP Mode).
IPv4 Address 192.168.110.100 Sets the password of Wireless(AP Mode).
AP Mode User Setting Don't disclose user Sets whether or not to disclose the AP mode
information to users other than the administrator.
Item Factory default setting Description
Factory Defaults - The settings of the network, mail server, LDAP
server, and secure protocol server are returned to
the default settings.
Item Factory default setting Description
SMTP Server (NULL) Sets the IP address or server name for the SMTP
server.
SMTP Port 25 Sets the port number for the SMTP server. Normally,
use the default setting.
Available range: 1 to 65535
SMTP Encryption None Selects an encryption method in the SMTP
communication.
Receive Setting Disable Sets the protocol to be used for receiving e-mails.
POP3 Server (NULL) Sets the IP address or server name for the POP3
server.
POP3 Port 110 Sets the port number prepared by POP3 on the
POP3 server.
Available range: 1 to 65535
POP Encryption None Selects an encryption method in the POP
communication.
Authentication Method No Authentication Selects an authentication method for e-mail
transmissions.
SMTP User ID (NULL) Sets the login name to the server used for SMTP
authentication.
SMTP Password (NULL) Sets a login password to the server used for SMTP
authentication.
POP User ID (NULL) Sets a login name to the server used for POP
certification or for printing received e-mail
attachment files.
Item Factory default setting Description

Oki C542dn Specifications

General

Brand	Oki
Model	C542dn
Category	Printer
Language	English