- 138 -
5. Operating Management/ Specifications
• Permission: Set to Permit/Prohibit each operation or Forced prohibit to any
operations. If Forced prohibit is set, operations that are allowed with other roles are
forbidden.
• Local User List: Add users to whom the role is assigned. Select the user from the list
and assign the role. Users can be assigned to roles being edited. You can cancel the
user's assignment. You can assign roles to users at the same time you register the
users.
• Kerberos User List: Add Kerberos users to whom the role is assigned.
7
Click [Submit].
You can copy registered roles to add.
Click [Copy] on the right of the role name to display the role information screen, change
items if required, and then register.
Registering Users
When using Local authentication for the user authentication, register users on a web
browser. Up to 5000 users can be registered.
1
Open the Web page of the machine.
Open the Web Page of This Machine
2
Log in as the administrator.
Log In as the Administrator
3
Click [User Management].
4
Click [User List].
5
Specify the user type.
• Local User: Register user information to the machine.
• LDAP User: User registered to the LDAP server. LDAP server authentication setting
is required. LDAP User cannot be registered. Only viewing users is available. You
can check users who used the machine.
• Kerberos User: Users registered to the Kerberos server. Kerberos server
authentication setting is required. Kerberos User cannot be registered. Only viewing
users is available. You can check the list of users who used the machine.
6
Click [+].
To Next Page
Loading...
Need help?
General
